Kosár 0

Gratulálunk! A rendelése megfelel az ingyenes szállítás feltételeinek. Már csak €300 hiányzik az ingyenes szállításhoz

Korlátozási értesítés

Csatlakozás a következőhöz
Ez ajándék?
Kosár összege Ingyenes
Kosár megtekintése
A szállítási költségek a vásárláskor kerülnek kiszámításra

A kosarad üres

How to use an LED face mask and how often to apply it? A guide to LED light therapy at home

Jak używać maski LED na twarz i jak często ją stosować? Przewodnik terapii światłem LED w domu

Is your skin becoming less firm? Or are you dealing with acne or dark spots? An LED face mask is one way to tackle these issues effectively. But to see results, it's not just the device that matters - how and how often you use it matters too. In this article, we'll explain how to use an LED face mask as part of a complete routine and how often to use it.

SEE ALSO: LED phototherapy - the science behind how it works

How do you use an LED face mask?

LED light therapy does not require specialist knowledge or a visit to a beauty clinic. But following a few steps can make a big difference to the treatment's effectiveness.

Step 1 - cleanse your face thoroughly

Before each session, your skin must be clean - free of makeup, sebum, and sunscreen. (SPF filters absorb light - all light, not just sunlight.) A gentle cleansing gel or foam is enough - you don't need to exfoliate your skin before every session.

Step 2 - put on the LED mask and choose a light mode

After putting on the mask, choose the mode that suits your skin's current needs.

  • Red light (630 nm) supports collagen production and is effective against the first signs of aging. 
  • Blue (415 nm) has antibacterial effects - especially suitable for acne-prone skin. 
  • Yellow (590 nm) improves skin tone and microcirculation. 
  • Infrared (850 nm) penetrates deepest and supports tissue regeneration [1].

SEE ALSO: LED face masks with different light colors - how do they work?

Step 3 - relax during the session

LED masks are designed to be worn while you go about your daily activities - reading, watching a TV show, or working. You don't have to sit in the dark or stay in one place. The only thing you shouldn't do is lie facing a window - direct sunlight during treatment defeats the purpose.

Step 4 - finish the treatment and apply your skincare

After the session, your skin will be slightly warm and stimulated to regenerate - a good time to apply a serum or cream. Studies suggest that after photostimulation, skin cells may absorb active ingredients more effectively, especially those that support collagen production [2].

LED face mask – how long should you wear it during each session?

Standard treatment time with an LED mask

A single LED light therapy session should last 10 to 20 minutes. This is the time when the body's repair processes are activated. A session that is too short (under 10 minutes) may not deliver a sufficient dose of light energy. A session that is too long offers no additional benefits, because cells have a natural limit to how they respond to light during a single session.

Does a longer session produce better results?

No. LED light therapy works by delivering an optimal dose – more doesn't mean better. Extending sessions beyond 20 minutes won't speed up results and may unnecessarily stress the skin. It's best to follow the device manufacturer's instructions and stick to the standard 10–20 minutes.

How often should you use an LED face mask?

Recommended frequency of LED mask use

During the first 4–6 weeks of treatment, an LED face mask should be used 3–5 times a week. This frequency regularly stimulates the skin's recovery processes without disrupting natural cell renewal cycles. Clinical studies have shown a 77% reduction in acne lesions after 12 weeks of regular therapy [3]. Interestingly, for photo-rejuvenation, two sessions a week for 4 weeks produce results comparable to three, while patient satisfaction remains high [4]. 

Red and infrared light therapies (630–850 nm) improve skin elasticity, reduce wrinkles, and support tissue regeneration within just a few weeks [5]. The effects last for up to a month after treatment ends – suggesting lasting changes in skin structure, not just temporary improvement [6].

Can an LED mask be used every day?

Yes – LED light therapy is safe enough that daily use poses no risk. For most people, however, sessions every other day produce better results than daily use: this gives the skin time to recover between treatments. Daily use makes sense during intensive recovery treatments, for example after in-office procedures [7] – but it's worth consulting a dermatologist about this.

Why is consistency key in LED light therapy?

An LED mask and light therapy work like exercise – a single session won't change anything, but repeating it regularly for several weeks produces real results. Your skin needs time to rebuild collagen, regulate sebum production, and even out its tone. Used irregularly, it works like going to the gym once a month: it isn't harmful, but simply doesn't deliver the expected results.

At-home LED light therapy – when do results appear?

First results after a few uses

What can an LED face mask do after just a few sessions? Your skin may look more rested, fresh, and radiant – thanks to improved microcirculation and oxygenation of the tissues. This is not yet a lasting change in skin structure, but it is a clear sign that the device is working [8].

SEE ALSO: The best ways to maintain youthful skin

Results after several weeks of using an LED mask

After 4–6 weeks of regular use of an LED mask, you may notice improvements in skin texture, reduced inflammation, and a more even complexion [9]. For skin aging concerns, the first visible results appear after 8–12 weeks – collagen rebuilds slowly but steadily [10].

How do you use the ZENT® DermaLight mask as part of your at-home skincare routine?

What does a single session with the ZENT® DermaLight mask involve?

The ZENT® DermaLight™ mask is placed over the face, the appropriate light mode is selected, and it is left on for 15–20 minutes. The device switches off automatically after 20 minutes, so you don’t need to keep track of the time. Built-in eye protection (EyeShield Pro™) means you don’t need any additional accessories. The mask weighs 93 g and is made of medical-grade silicone, so it’s really comfortable to wear.

ZENT DermaLight LED face mask
Recommended product
ZENT DermaLight

An LED mask for at-home facial skincare using different colors of light.

View product

The ZENT® DermaLight™ mask uses 216 LEDs with four wavelengths (415 nm, 590 nm, 630 nm, and 850 nm), allowing targeted treatment for specific skin concerns – rather than one default mode for everyone.

How often should you use the ZENT® DermaLight mask?

The manufacturer of the ZENT® DermaLight™ mask recommends regular sessions several times a week during the first weeks of treatment. 

Common mistakes when using an LED mask

Irregular use of the LED mask

Inconsistent use is the most common reason why the results of LED face mask therapy are less noticeable. Skin responds to regular stimulation – not occasional use. If sessions are infrequent and irregular, the regenerative processes won’t have time to take hold.

Treatment session that’s too short or too long

A 5-minute session won’t deliver enough light energy. On the other hand, a session lasting 40 minutes won’t give you twice the results – it will only cause unnecessary skin fatigue. Stick to the 10–20-minute window recommended by most medical-grade device manufacturers.

Improper skin preparation

As explained in Step 1, makeup and sunscreen block photons before they reach the epidermis. This is especially worth remembering in the evening, when skincare habits are deeply ingrained: serum before an LED mask is a mistake; serum afterward is absolutely fine.

An LED face mask is a preventive and complementary tool – it won’t replace a dermatologist, but as part of your daily routine, it can really improve your skin’s condition. If you don’t see any changes after 8–10 weeks of regular use, consult a specialist.

FAQ – frequently asked questions about using an LED face mask

How do you use an LED face mask?

Cleanse your skin, put on the mask, choose a light mode suited to your skin’s needs, and relax for 10–20 minutes. After the session, apply a serum or cream. Avoid makeup and SPF creams before treatment – they block light from reaching the deeper layers of the skin.

LED face mask – how long should you wear it during each session?

A standard session lasts 10–20 minutes. This is enough time for photons to reach the cells and stimulate the mitochondria to produce ATP. Longer sessions do not produce better results, so follow the device manufacturer's instructions.

How often should you use an LED mask at home?

During the first few weeks of treatment, use it several times a week. Once you achieve results, 1–2 sessions per week are enough for maintenance. Consistency is key, not intensity.

Can you use an LED mask every day?

Yes, LED light therapy is safe for daily use. However, for most skin types, a session every other day is optimal, giving the skin time to recover between treatments.

How long does it take to see the effects of LED light therapy?

The first effects (a fresh appearance, improved skin tone) are noticeable after a few sessions. Lasting improvements in skin texture, wrinkle reduction, or fewer acne lesions can be seen after 4–12 weeks of regular use, depending on the issue.


Footnotes

[1] Guo, Z. et al. (2025). “The Application of Light Emitting Diode (LED) in Cosmetic Dermatology." Photodermatology. 
[2] Andre, N. et al. (2022). “Effects of a LED light therapy mask on an ex vivo skin model and clinical signs of aging." Journal of Investigative Dermatology. 
[3] Diogo, M.I.G. et al. (2024). “Lighting the Path: Evaluating Light-Emitting Diode Therapy Versus Salicylic Acid Peel for Inflammatory Acne – A Case Series Analysis." Journal of Advances in Medicine and Medical Research.
[4] Bragato, E.F. et al. (2025). “Role of photobiomodulation application frequency in facial rejuvenation: randomized, sham-controlled, double-blind, clinical trial." Lasers in Medical Science.
[5] Couturaud, V. et al. (2023). “Reverse skin aging signs by red light photobiomodulation." Skin Research and Technology.
[6] Mineroff, J. et al. (2023). “Male facial rejuvenation using a combination 633, 830, and 1072 nm LED face mask." Archives of Dermatological Research.
[7] Baldassarro, V.A. et al. (2023). “Photobiomodulation at Defined Wavelengths Regulates Mitochondrial Membrane Potential and Redox Balance in Skin Fibroblasts." Oxidative Medicine and Cellular Longevity.
[8] Andre, N. et al. (2022). “Effects of a LED light therapy mask on an ex vivo skin model and clinical signs of aging." Journal of Investigative Dermatology.
[9] Mineroff, J. et al. (2023). “Male facial rejuvenation using a combination 633, 830, and 1072 nm LED face mask." Archives of Dermatological Research.
[10] Park, S.H. et al. (2025). “Clinical study to evaluate the efficacy and safety of home-used LED and IRED mask for crow's feet: A multi-center, randomized, double-blind, sham-controlled study." Medicine.

See also: Evening Facial Care Step by Step

Pozostałe artykuły

Kobieta myjąca zęby przy lustrze, dbająca o higienę jamy ustnej i zdrowie dziąseł

Gingivitis - symptoms, causes, and treatment

In this article What is gingivitis? Gingivitis symptoms: How can you recognize the problem? Bleeding gums - causes Gingivitis - causes. What most often leads to inflammation? What helps with...